Regular Price: €359.00

Now: €339.00 Excl. VAT

Free shipping included
In Stock


SDS1202X-E Series Digital Oscilloscope 

SIGLENT’s new SDS1000X-E Series Super Phosphor Oscilloscope is available in one bandwidth, 200 MHz. It has a maximum sample rate of 1 GSa/s and a standard record length of 14 Mpts. For ease-of-use, the most commonly used functions can be accessed with its user-friendly front panel design.

The SDS1000X-E series employs a new generation of SPO (Super Phosphor Oscilloscope) technology that provides excellent signal fidelity and performance. The system noise is also lower than similar products in the industry. It comes with a minimum vertical input range of 500 uV/div, an innovative digital trigger system with high sensitivity and
low jitter, and a waveform capture rate of 400,000 frames/ sec (sequence mode). The SDS1000X-E also employs a256-level intensity grading display function and a color
temperature display mode not found in other models in this class. Siglent’s latest oscilloscopes offering supportsmultiple powerful triggering modes including serial bus
triggering. Decoding is standard configuration including IIC,SPI,UART,CAN,LIN. History waveform recording and sequential triggering enable extended waveform recording
and analysis. Another powerful addition is the new 1 million points FFT math function that gives the SDS1000X-E very high frequency resolution when observing signal spectra. The new design also includes a hardware co-processor that delivers measurements quickly and accurately. The features and performance of Siglent’s new SDS1000X-E cannot be matched anywhere else in this price class.

  • 200 MHz bandwidth model.
  • Real-time sampling rate up to 1 GSa/s.
  • The newest generation of SPO technology
•Waveform capture rate up to 100,000 wfm/s, and 400,000 wfm/s (sequence mode)
•Supports 256-level intensity grading and color display modes •Record length up to 14 Mpts
•Digital trigger system 
  • Intelligent triggers: Edge, Slope, Pulse Width, Window, Runt, Interval, Time out (Dropout), Pattern.
  • Serial bus triggering and decoding (Standard), supports IIC, SPI, UART, RS232, CAN, and LIN
  • Video trigger, supports HDTV
  • 10 types of one-button shortcuts, supports Auto Setup, Default, Cursors, Measure, Roll, History, Display/Persist, Clear Sweep, Zoom and Print
  • Segmented acquisition (Sequence) mode, dividing the maximum record length into multiple segments (up to 80,000), according to trigger conditions set by the user, with a very small dead time segment to capture the qualifying event
  • History waveform record (History) function, the maximum recorded waveform length is 80,000 frames
  • Automatic measurement function for 38 parameters, supports Statistics, Zoom measurement, Gating measurement, Math measurement, History measurement and Ref measurement
  • 1 Mpoints FFT
  • True measurement and math of all sampled data points (to 14M)
  • Math functions (FFT, addition, subtraction, multiplication, division, integration, differential, square root)
  • Preset key can be customized for user settings or factory “defaults”
  • Security Erase mode
  • High Speed hardware based Pass/Fail function
  • Large 7 inch TFT-LCD display with 800 * 480 resolution
  • Multiple interface types: USB Host, USB Device (USBTMC), LAN (VXI-11), Pass/Fail, Trigger Out
  • Supports SCPI remote control commands
  • Supports Multi-language display and embedded online help

Model types:







Real time sampling rate

1 GSa/s

Memory depth

7 Mpts/CH (Dual-Channel); 14 Mpts/CH (Single-Channel)

Waveform Capture Rate (Max.)

100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode)

Serial Trigger (Standard)


Decode Type (Standard)


Trigger Type

Edge, Slope, Pulse Width, Window, Runt, Interval, Dropout, Pattern, Video

Probe (Std)

2 pcs passive probe PP215


7 inch TFT-LCD (800x480)


Without package 2.5 Kg; With package 3.5 Kg


Similar products

SDS1202X+ 200MHz + Waveform generator + FREE Decode license

Regular Price: €855.00

Now: €726.75 Excl. VAT

SDS1202X 200MHz + FREE Decode license

Regular Price: €625.00

Now: €531.25 Excl. VAT

SDS1102X+ 100MHz + Waveform generator + FREE Decode license

Regular Price: €719.00

Now: €611.15 Excl. VAT

Siglent SDS1102CML+
299 €299.00 Excl. VAT

Latest customer reviews

Write a review

Read all reviews (10)

Review by old phoenix 
Posted on 30/10/2018
ez egy nagyon jól sikerült kis gép, és még az FFT analizátora is használhato, sokkal jobban mint a RIGOL1104
Review by AlexC 
Posted on 13/01/2018
I bought this product about one month ago and i was so excited about it ,as i'm an begginer,and when it arrived i was shocked by the great wrapping of the package,all the accessories as mentioned, and when i started to use ohh maannn this scope doesn't need advertisment it's great only by how it looks not to mention his functionality.I love it, great quality for the money and safe tracking of the package made me think that i should buy from this supplier my tools to made my lab only with siglent stuffs,in the future maybe i will buy an waveform generator who knows.
Review by Jakub 
Posted on 06/12/2017
This scope, when taking in perspective its price, is unbelievable.The screen's readability is excellent, the refresh rate is insane, menus are slick and responsive. It's still very much a budget scope, but it is very capable. I haven't yet played with serial decoding, but the fact that it's there for free is enough.
I can't recommend it enough, the best entry-level scope on the market by a loooong shot.
-responsive, good refresh rates
-great screen
-intensity graded display, it's soooo easy on the eyes
-all the triggers a beginner would want, extra low jitter
-serial decoding
-autosetup doesn't suck too massively
-connection via USB or Ethernet is very useful (USB is way faster though), I can grab screencaps and share them very easilly and the program to do it doesn't completely suck (EasyScopeX, requires free NI VISA runtime environment)
-very light and compact
Cons / complaints:
-the encoders could be a bit more precise, often I find myself scrolling past something. But they're by no means terrible
-some features are hard to find in the menus, as there are a bit too few options displayed on the screen at a time
-the handle doesn't look very sturdy compared to a more traditional handle attached to the sides of the scope
-only four measurements can be displayed at all times without putting an overlay on the waveform display portion of the screen. I think there would be a way to get rid of some menus to display more without covering the waveform
-it's so light that it sometimes slides on a smooth table from pushing the buttons. The
rubber feet on the back could have more traction
Review by Adrian L 
Posted on 04/11/2017
This is a great oscilloscope for the money. It has a great screen and a lots of options. I think that this is an execllent peice of kit for a home laboratory or a small repair shop. I love the fact that Siglent opted for direct sales thus keeping the price in the affordable area.
Review by stenbror 
Posted on 20/09/2017
I already own a 2000 series scope and didnt need another one, but i just couldn't ressist the urge to by this nice little master piece of a scope. Siglent 1202X-E is easy to use and contains most of what you need and 200MHZ bandwith.. Amazing for the price.

It is a perfect home lab. scope and especially good for beginners whit keys and knobs perfectly placed for an easy workflow.

I also own Rigol 1054z and i can easily say that this Siglent unit is better, even with only two channels... And best of all. You dont need to buy expensive software upgrades for it to work as intended. Serial decoding and all triggers are free.
Review by Nabil 
Posted on 07/09/2017
---- French ----
Excellent produit pour un débutant. Pleins de fonctions intégrés. Le rapport qualité/prix est réellement bon. Le produit est livré avec deux sondes et son câble d'alimentation.

---- English ----
Lot of features for this price. Easy to use. Help a lot to debug microcontroller projects.

When will you release the 4 channels version?
Review by JamesS 
Posted on 30/08/2017
I bough this scope to replace an old analogue scope, and to compliment my larger (but older) LeCroy scope. A 2-channel scope with analogue-like display that costs almost the same as an old Tek analogue scope seemed like a no-brainer.

However, this scope is so much better than I thought it would be!

For me the most important benefit is that the scope is fast. Not just fast waveform update rate (which is has), but a fast UI - it never gets bogged down. Every time you twiddle a control, the scope responds. It makes debugging so much faster.

Having segmented memory (history) mode always active is such a good thing. When you are debugging a complex signal, being able to review what happened in slow motion is so educational. You don't have to set this up, it's always there when you press stop -- again, it makes debugging so much faster.

Free serial decoding! So very useful. Though, it's not really "real-time".

In fact, many of the features billed as real-time are not. For example, measurements and statistics do update, but only at about 1Hz, so even if you are capturing 1000 waveforms a second you only get statistics updating using one of these waveforms every second. This is a shame because fast statistics updates can be such a great way to get confidence in a signal. Then again, this scope is very low cost! But these features don't slow down the UI. If I had to choose between faster measurements and a slow UI, or slower measurements and a fast UI, I'd take the fast UI every time. so I can see why Siglent has done this. It keeps the UI very responsive.

There are a few bugs in the firmware that hopefully will be fixed soon in an update. The most annoying is when you set a DC offset. This is relative to the currently selected V/div scale, rather than being absolute. So, for example, if you set a 1V offset then change the vertical scaling the offset will change, so you have to keep adjusting as you zoom in and out. What you want is it to stay at 1V then you can refine it as you zoom in. It's very annoying but you can work around it.

Honestly, since getting the Siglent, the LeCroy has hardly been on. It's that good! The Siglent has lower noise, much faster waveform updates and more responsive UI. But it is only 2 channels and has a smaller, non touch-screen display so it can't replace the LeCroy for everything.

Would I buy this scope again? Definitely!
Review by Alan 
Posted on 24/07/2017
This is my first oscilloscope - not the cheapest but nearly so and appears to offer better specs than anything cheaper. It was very easy to set up and use - pretty much straight out of the box on default setup I was able to see the I2C clock and data channels between a development FT232 module and some PIC chips and see what was going wrong. Checked some tutorial videos to see what was needed and set trigger options to set a one shot trigger, but default auto setup gave close to what I needed and the intuitive user interface made it easy to explore the available options to capture what was happening on the I2C line. Overall, a good spec for the price but more importantly, the well deigned user interface made it easy to access the features and solve problems that had been holding me up for a while - should have got a scope like this ages ago! Cannot be sure about the durability as I've only had it 2 days but seems well build :)
Review by arturfra  
Posted on 24/05/2017
Good price for good oscilloscope, if in the future firmware upgrade the user can change the dimension of the fonts specially for read values it will be the top for its price, because they are too small
Review by The Milkman 
Posted on 06/05/2017
The SDS 1202X-E has excellent performance, the user interface is friendly and overall great value for money. Would definitely recommend this product to interested purchasers.