Siglent SDS5052X 2Ch 500MHz 5GSa/s Oscilloscope
Details
Siglent SDS5052X 2 Channel 500MHz 5GSa/s Oscilloscope
SIGLENT’s SDS5000X series Digital Storage Oscilloscopes are available in bandwidths of 1 GHz, 500 MHz and 350 MHz, have a maximum sample rate of 5 GSa/s, maximum record length of 250 Mpts, and display up to 4 analog channels + 16 digital channels mixed signal analysis ability. The SDS5000X series employs Siglent’s SPO technology with a maximum waveform capture rate of up to 110,000 wfm/s (normal mode, up to 480,000 wfm/s in Sequence mode), 256-level intensity grading display function plus a color temperature display mode. It also employs an innovative digital trigger system with high sensitivity and low jitter. The trigger system supports multiple powerful triggering modes including serial bus triggering. History waveform recording, Sequence acquisition, Search and Navigate functions allow for extended waveform records to be captured, stored, and analyzed. An impressive array of measurement and math capabilities, options for a 25 MHz arbitrary waveform generator, as well as serial decoding are also features of the SDS5000X. The large 10.1’’ display capacitive touch screen supports multi-touch gestures, with the addition of user-friendly one-button design for most commonly used functions, can greatly improve the operation efficiency of the SDS5000X. It also supports mouse and external keyboard control.

- 1 GHz, 500 MHz, 350 MHz models with real-time sample rate up to 5 GSa/s SPO technology
• Waveform capture rates up to 110,000 wfm/s (normal mode), and 480,000 wfm/s (sequence mode)
• Supports 256-level intensity grading and color temperature display modes
• Record length up to 250 Mpts
• Digital trigger system - Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern, Qualified and Video (HDTV supported). Trigger zone helps to simplify advanced triggering
- Serial bus triggering and decoder, supports protocols I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S and MIL-STD1553B
- Low background noise, supports 0.5 mV/div to 10 V/div voltage scales
- Segmented acquisition (Sequence) mode, dividing the maximum record length into multiple segments (up to 100,000), according to trigger conditions set by the user, with a very small dead time between segments to capture the qualifying event
- History waveform record (History) function, the maximum recorded waveform length is 100,000 frames
- Automatic measurement function on 39 parameters, supports statistics with histogram, Gating measurement,
- Math measurement, History measurement and Ref measurement Math function (2 Mpts FFT, addition, subtraction, multiplication, division, integration, differential, square root), supports math on math
- Search and Navigate
- Digital Voltmeter Waveform Histogram
- High Speed hardware-based Average, Eres (Enhanced Resolution)
- High Speed hardware-based Mask Test function, with Mask Editor tool for creating user-defined masks
- 16 digital channels (optional) with maximum waveform capture rate up to 1.25 GSa/s, record length up to 62.5 Mpts
- 25 MHz function / arbitrary waveform generator, built-in multiple predefined waveforms
- Large 10.1” TFT-LCD display with 1024 * 600 resolution; Capacitive touch screen supports multi-touch gestures
- Supports external mouse and keyboard
- 10 types of one-button shortcuts
- Multiple interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11, telnet, socket, web), Pass/Fail, Trigger Out, 10 MHz In, 10 MHz Out, VGA output
- Built-in web server supports remote control by the LAN port using a web browser
- Supports SCPI remote control commands
Main parameters:
Model |
|||
Bandwidth |
350 MHz |
500 MHz |
1 GHz |
Sampling Rate (Max.) |
5 GSa/s |
||
Channels |
2/4CH+EXT |
||
Memory Depth (Max.) |
250 Mpts/CH ( interleave mode); 125 Mpts/CH (non-interleave mode)
|
||
Waveform Capture Rate (Max.) |
110,000 wfm/s (normal mode), 480,000 wfm/s (sequence mode) |
||
Trigger Types |
Edge, Slope, Pulse width, Window, Runt, Interval, Dropout, Pattern, Video,Qualified |
||
Serial Trigger & Decoding |
I2C, SPI, UART, CAN, LIN (Standard); CAN FD, Flexray,I2S, MIL-STD-1553B (Optional) |
||
Digital channels (Optional) |
16-channel; Maximum waveform capture rate up to 1.25 GSa/s, Record length up to 62.5 Mpts
|
||
Waveform Generator
|
Single channel, 25 MHz, sample rate of 125 MHz, wave length of 16 kpts
|
||
I/O
|
USB Host, USB Device, LAN, Pass/Fail, Trigger Out, 10 MHz In, 10 MHz Out, VGA Output |
||
Display |
10.1” TFT-LCD with capacitive touch screen (1024*600) |
Standard Accessories:
1 x | USB cable |
1 x |
Quick start x1 |
2 x |
SP2035A 350MHz Passive probe x2 (2 Channel models) |
1 x |
Certificate of calibration |
1 x |
Power cord |
Additional licenses and options:
350 MHz to 500 MHz bandwidth upgrade (2-ch model) * |
|
I2S trigger & decode License |
|
CAN FD trigger & decode License |
|
FlexRay trigger & decode License |
|
MIL-STD-1553B trigger & decode License |
* SDS5034X/SDS5032X cannot be upgraded to SDS5104X/SDS5102X
Options
SAG1021 | Accessory for use with the SDS5000X oscilloscopes. Output Sine, Square, Ramp, Pulse, Noise, DC and 45 built-in waveforms.The arbitrary waveforms can be accessed and edited by the EasyWave PC software.. Sample rate is 125 MHz. |
SLA1016 | MSO activation license + hardware for SDS5000X series Oscilloscopes. Unlocks MSO firmware capabilities for the SDS5000X oscilloscope series. Adds 16 logic channel display. Requires the SLA-1016 logic probe hardware for full functionality. |
Downloads
SDS5000X Series Datasheet |
![]() |
Download |
SDS5000X Series Manual |
![]() |
Download |