Siglent SAP1-kit Accessory Kit for SAP1000 / SAP2500
Siglent SAP1-kit for SAP1000 and SAP2500 active probes: straight and pogo tips, L-in adapter, Z ground, pin leads and channel ID clips.
Full accessory kit for the single-ended active probes
Everything needed to actually use a single-ended active probe on a real board, in one box.
The pin leads and the Z ground matter more than they sound. At gigahertz frequencies the ground return path is part of the measurement, and a long ground lead adds inductance that appears as ringing you will spend an afternoon chasing through a circuit that was never producing it.
Package contents
- 5 × Straight Tip
- 5 × Pogo Tip
- 1 × L In Adapter
- 1 × Z Ground
- 1 × Y Lead Adapter
- 1 × Right Angle Pin Lead 5 cm
- 1 × Straight Pin Lead 6 cm
- 1 × Right Angle Pin Lead 10 cm
- 1 × Straight Pin Lead 12 cm
- 1 × Channel ID Clips (set of 4 colours)
Order code SAP1-kit · supplied by SIGLENT
When you need it
Setting up a probe properly the first time
The short Z ground is the one accessory that most changes what a fast probe shows you. Buying the probe without it is a false economy.
Multi-channel work
Channel ID clips in four colours stop the perennial question of which trace belongs to which probe.
Fits these probes
Check the model before ordering — probe accessories are rarely interchangeable between families, and a head or tip that does not fit is of no use at all. If your probe is not listed here, ask us and we will find the right part.
Other probe accessories
Not sure this is the right part?
Tell us the probe model and what you are trying to reach on the board. Probe accessories are not interchangeable between families, and it takes us a minute to confirm the right one — which is a minute better spent than a return.